The system employs infrared lasers for stage and focus control. The operator
should avoid placing any parts of the body in the path of the laser beam.
Procedure: ( « represents the Enter key )
Gather lubrication materials: Nye oil, several wipes, and large swab.
Three stage rails for each quadrant of stage location need to be oiled.Oiling
surfaces are the tops of the side rails and the sides of the center rails.
While in command mode:
Use the manual stage motion joystick by the stage limit switch to move
the stages to the (x0,y0) limit position and oil the rails at the two exposed
quadrants. Then move the stages to the (x4M,y4M) limit position and oil the
exposed rails at the remaining two quadrants.